Skip To Content

Oil Sands Environmental Management Bibliography

The Cumulative Environmental Management Association (CEMA)partnered with the Oil Sands Research and Information Network (OSRIN) to create the new Oil Sands Environmental Management Bibliography, which includes documents relevant to the environmental management of oil sands development in Alberta. The majority of the documents focus on the mineable oil sands in the Athabasca deposit, though some documents relate to in-situ developments. This bibliography was last updated in November 2014.

Effects of wastewater from an oil-sand-refining operation on survival hematology gill histology and swimming of fathead minnows

Year of Publication: 2004

Abstract:
This study examined the effects of various types of wastewater produced in oil-sand-refining on the survival, hematology, gill morphology, and swimming of caged fathead minnows (Pimephales promelas Rafinesque, 1820). At the reference site, all fish survived a 28-day exposure with unchanged hematocrit, leucocrit, and gill histology. In con- trast, all fish did not survive a 28-day period in any of the wastewaters tested and, in some cases, they had all died within 96 h. In addition, the hematology or gill morphology of fish that had survived shorter exposure durations was found to be significantly altered; the changes included a significant decrease in lymphocytes and significant gill cellular hyperplasia and hypertrophy. The present data suggest that water remediation will be needed before the process wastewater from oil-sand-refining can support fish populations.

Efficacy of a radar-activated on-demand system for deterring waterfowl from oil sands tailings ponds

Year of Publication: 2006

Abstract:
Oil sands mining is one of several industrial activities that produces effluent that is dangerous to waterfowl. Such industries require effective systems to deter birds, but current deterrents are not always successful, presumably because wildlife ignore or habituate to them. We tested a new radar-activated on-demand system of deterrence in the oil sands region of Alberta, Canada, by comparing the proportion of birds that landed on a tailings pond while it was activated with the proportion that landed during two other treatments: a continuous, randomly activated, deterrent system, and control periods with no deterrents. We also assessed the efficacy of different stimuli types within the on-demand system. Across several bird guilds, only the on-demand deterrent system significantly reduced the probability of birds landing in comparison with the control treatment. In addition to treatment effects, birds were more likely to land earlier in the spring and when they flew at lower altitudes, and shorebirds were more likely to land than ducks, geese and gulls. The comparison of stimuli revealed that cannons elicited significantly more response by birds in flight than mechanized peregrine falcon effigies with speakers broadcasting peregrine sounds. Synthesis and applications. Our results promote the use of on-demand systems for waterfowl deterrence at tailings ponds and recommend cannons over effigies as stimuli. We suggest that oil sands deterrence efforts should (i) be operational in the early spring, when tailings ponds appear to be most attractive to migrating waterfowl, (ii) target low-flying waterfowl and shorebirds and (iii) be effective during both day and night. These results and recommendations have potential application for problems of bird deterrence at several other industrial sites.

Electrocoagulation of tar sand tailings pond waters

Authors Renk, R. R.
Year of Publication: 1989

Abstract:
Tar sand processing waste waters from Syncrude Canada Ltd. and other commercial and experimental operations were treated with a new electrocoagulation process that uses electrical current to destabilize and remove dissolved and suspended materials. The purpose of the treatment is to produce a low-cost environmentally acceptable water for storage reuse or discharge. Bench-scale tests indicate an operating cost of around 34/cubic meter (104/1000 gal). Materials removed from the waste water include dissolved and suspended materials, both organic and inorganic. The electrocoagulation processes removed 99% of the total suspended solids; 65% to 95% of the dissolved (0.45 llIlI filtered) silica. calcium. and magnesium; and 50% to 95% of the total organic carbon. Microtox'" tests indicated a moderate reduction in toxicity after electrocoagulation. Electrocoagulation may provide an inexpensive way of separating solids from tailing. The water could then be stored. discharged or reused. and the solids could be handled separately in a relatively dry form. thus potentially eliminating the need for large tailing ponds.

Electrokinetic dewatering of oil sands tailings

Authors Guo, Y.
Year of Publication: 2012

Abstract:
Oil sands tailings are the final product of oil sands processing and in the form of slurry with very low solid content. After sedimentation, due to a low hydraulic conductivity of the tailings, both dewatering and consolidating the tailings are difficult. Since electrokinetic (EK) is an effective method to consolidate low permeability soils, the objective of this study is to assess the effectiveness and efficiency of EK dewatering of MFT, a man-made geomaterial. Two series of tests were conducted in this study. In the first series, four EK cell tests were performed on oil sands tailings to measure the electroosmotic permeability, ke, along with other parameters, such as the EK induced water flow rate, electrical conductivity of the tailings, and power consumptions. The second test series was the dewatering model tests to investigate the feasibility of EK dewatering on oil sands tailings. The performance of the EK dewatering under two conditions was compared, i.e., 5 kPa consolidation at first followed by EK dewatering; and 5 kPa consolidation and EK dewatering simultaneously. The final water content, undrained shear strength and plasticity properties of MFT were measured after the EK dewatering tests. After the EK dewatering model tests, a significant overall increase in the undrained shear strength and decrease in the water content of tailings samples are observed, along with significant changes of the plasticity.

Electrophoretic properties of oil sands tailings and constituent clays in aqueous suspensions

Year of Publication: 1982

Abstract:
Electrophoretic mobilities of various clays and their mixtures were measured atseveral temperatures in solutions having different pH values and differentconcentrations of added electrolytes (NaCI and CaCI2). Similarmeasurements have been made on kaolinite suspended in both real and syntheticoil sands tailings water. Further electrophoretic measurements have been madeon oil sands tailings sludge solids suspended in "clean" solutions and inboth real and synthetic tailings water. Results of these measurementsand others that are cited are consistent with the view that the stability ofsuspensions of fine minerals (mostly clays) in oil sand tailings issubstantially due to the properties of mixed clay colloids and possibly also tointeractions of these clays with bituminous organic substances that are sotightly bound to the clays that they are not removed by "ordinary"chemical treatment.

Electrospray ionization fourier transform ion cyclotron resonance mass spectrometry characterization of tunable carbohydrate-based materials for sorption of oil sands naphthenic acids

Year of Publication: 2013

Abstract:
The potential for sorption and possible degradation of components in oil sands processed water (OSPW) by the use of synthetically engineered co-polymers is receiving growing attention. Recent research has highlighted the sorption of total oil sands naphthenic acid fraction components (NAFCs) by β-cyclodextrin (β-CD) co-polymers. The incorporation of β-CD within co-polymer frameworks represents a novel modular approach with significant potential for controlled tuning of the textural mesoporosity of the sorbents. Herein, we report the Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS) characterization of aqueous samples containing oil sands NAFCs following sorption with a range of cyclodextrin-based co-polymers. The materials investigated were β-CD cross-linked with three different types of diisocyanates, namely, (i) 4,4′-dicyclohexylmethane diisocyanate, (ii) 4,4′-diphenylmethane diisocyanate, and (iii) 1,4-phenylene diisocyanate. Variable sorption of NAFCs was observed according to the cross-linking density of the co-polymer framework and the nature of the cross-linker unit. Furthermore, the sorption of the NAFCs by the co-polymers was not affected by other parameters, such as metal ions, salinity, and non-oil sands acid fractions present in OSPW. The observation of molecular selective sorption in co-polymer materials containing β-CD represents an important contribution toward the development of sorbent materials for the controlled removal of oil sands acids in aquatic environments. The FT-ICR MS measurements also contribute further to the understanding of the thermodynamic sorption mechanism of such materials.

Electrospray-mass spectrometric analysis of reference carboxylic acids and Athabasca oil sands naphthenic acids

Year of Publication: 2003

Abstract:
Naphthenic acids (NAs) are complex mixtures of naturally occurring acyclic and cyclic aliphatic carboxylic acids that are responsible for the toxicity of the water in the tailings ponds associated with the recovery of bitumen from the Athabasca oil sands. NAs are difficult to analyze due to their complexity and the lack of commercially available NA standards. This paper describes the use of negative ion electrospray ionization mass spectrometry for the analysis of NAs. Model carboxylic acids, alone and in mixture, afforded mass spectral signal intensities that were highly dependent on extractor and cone voltages and on molecular structure. These effects were also observed for authentic NAs. Under conditions that were close to optimal for all the model compounds, their calibration sensitivities varied by a factor of <2, and there were minimal interactions when the model compounds were examined in mixture. Under the same conditions, the authentic NAs showed apparent congener distributions similar to those observed previously by GC/MS for derivatized NAs. The similar calibration sensitivities among congeners allowed the use of the standard addition method to determine the approximate absolute concentrations of NA congeners in an authentic sample.

Elemental and spectroscopic characterization of fractions of an acidic extract of oil sands process water

Year of Publication: 2013

Abstract:
‘Naphthenic acids’ (NAs) in petroleum produced water and oil sands process water (OSPW), have been implicated in toxicological effects. However, many are not well characterized. A method for fractionation of NAs of an OSPW was used herein and a multi-method characterization of the fractions conducted. The unfractionated OSPW acidic extract was characterized by elemental analysis, electrospray ionization-Orbitrap-mass spectrometry (ESI-MS), and an esterified extract by Fourier Transform infrared (FTIR) and ultraviolet–visible (UV) absorption spectroscopy and by comprehensive multidimensional gas chromatography–MS (GCxGC–MS). Methyl esters were fractionated by argentation solid phase extraction (Ag+ SPE) and fractions eluting with: hexane; diethyl ether: hexane and diethyl ether, examined. Each was weighed, examined by elemental analysis, FTIR, UV, GC–MS and GCxGC–MS (both nominal and high resolution MS). The ether fraction, containing sulfur, was also examined by GCxGC–sulfur chemiluminescence detection (GCxGC–SCD). The major ions detected by ESI-MS in the OSPW extract were assigned to alicyclic and aromatic ‘O2’ acids; sulfur was also present. Components recovered by Ag+ SPE were also methyl esters of alicyclic and aromatic acids; these contained little sulfur or nitrogen. FTIR spectra showed that hydroxy acids and sulfoxides were absent or minor. UV spectra, along with the C/H ratio, further confirmed the aromaticity of the hexane:ether eluate. The more minor ether eluate contained further aromatics and 1.5% sulfur. FTIR spectra indicated free carboxylic acids, in addition to esters. Four major sulfur compounds were detected by GCxGC–SCD. GCxGC–high resolution MS indicated these were methyl esters of C18 S-containing, diaromatics with ⩾C3 carboxylic acid side chains.

Eliminating barriers to worker mobility: Increasing the availability of skilled labor in Alberta's oil sands industry

Year of Publication: 2008

Abstract:
A marked increase in demand for skilled labor in Alberta is driving up construction costs in the energy sec- tor, particularly in relation to oil sands projects. Federal and provincial regulations and other government obstacles inhibit the ability of labor markets to adjust to increasing labor demand. Policy reform is needed to maximize the mobility of labor. Specifically, the movement of work- ers within Canada is constrained by redundant licensing requirements imposed by the provinces. Canada’s employment insurance program also impedes labor mobility by effectively rewarding workers who remain in areas with chronic unem- ployment rather than relocating to areas with greater employment opportunities. Foreign workers face impediments coming into the country as well. The North American Free Trade Agreement (NAFTA) facilitates the cross-border movement of profes- sionals, but fails to expedite the flow of skilled tradespeople. Workers from outside North America also face a variety of immigration hurdles. In light of these problems, this report offers recommendations for policy reforms that would improve worker mobility, thereby increasing the supply of skilled labor in Alberta and elsewhere. Among the recommendations: 1) institute mutual licensing certification among the provinces; 2) eliminate incentives within employment insurance pro- grams that keep workers in areas where employment is largely seasonal; and 3) revise NAFTA to facilitate the cross-border flow of skilled workers.

Emergence growth and dispersal of Chironomidae in reclaimed wetlands in the Athabasca oil sands region of Alberta

Year of Publication: 2010

Abstract:
Concerns over the environmental impacts of oil sands extraction in northeastern Alberta has increased as the industry continues to expand. This study examined if the emergence, growth, and dispersal of Chironomidae differ in reclaimed wetlands constructed with oil sands process materials (OSPM) when compared with growth in reference wetlands. Five floating 30 cm diameter halo traps were deployed in various wetlands for a 24 hour period. Exuviae trapped in the surface water film were then collected, identified, and counted. Chironomids grown in laboratories from egg masses collected from 2 OSPM-affected wetlands and 2 reference wetlands were paired according to geographic proximity under controlled conditions for 1 generation. Chironomid larval growth was quantified in situ in the wetlands by reciprocally transferring second instar, second generation culture larva. The dispersal of the larvae was quantified by tabulating the number of adults caught in sticky insect traps located along 3 radially-arranged transects in each wetland. A preliminary analysis has suggested that fewer chironomids emerged from the OSPM-affected wetlands. No differences in dispersal distance between the OSPM-affected and reference wetlands were observed.

Emergent insect sampling with light traps upper Athabasca River, September, 1993

Authors Dunnigan, M.
Year of Publication: 1994

Abstract:
Report presenting the results of a study to assess the feasibility of collecting adult aquatic insects by means of light trapping from the Athabasca River for trace contaminent analyses. And also to obtain tissue samples for organic contaminant (dioxins, furans, and polyaromatic hydrocarbons) and stable isotope (carbon and nitrogen) analysis.

Emergent plant communities of oxbow lakes in northeastern Alberta: Salinity water-level fluctuation and succession

Authors Lieffers, V. J.
Year of Publication: 1984

Abstract:
Emergent vegetation was sampled in 15 oxbow lakes in a 50-km segment of the Athabasca River in northeastern Alberta. Cover of individual species was visually assessed in plots at the outer, middle, and (or) inner edge of the emergent zone of each lake ( n , 37 sample units). Detrended correspondence analysis showed two main axes of variation. The first axis related to salinity. Water conductivity ranged from 170to 12200 pS cm-' and community types ranged from freshwater fens to saline wetland communities dominated by Scolochloafestucacea, Scirpus maritirnus, and Triglochin maritima. The second axis of variation related to water-level fluctuations. Half of the lakes had an increase in water level in the recent past (ca. 6-30 years). In these lakes, Typha latifolia was dominant in both grounded and floating substrates subjected to increased water levels. Sedge communities dominated by Carex rostrata, C . aquatilis, and Acorus calanzus were common in sites with stable water levels. In freshwater lakes, floating substrates were established over open water by the lateral growth of floating stems of Calla pal~tstrisand Potentilla palustris. Floating substrates were not in the saline sites probably because these open-water colonizers were not present under saline regimes.

Emission abatement potential for the Alberta oil sands industry and carbon capture and storage (CCS) applicability to coal-fired electricity generation and oil sands

Authors Walden, Z.
Year of Publication: 2011

Abstract:
In an increasingly greenhouse gas (GHG) conscious environment, Alberta has faced criticism for its heavy emissions within the oil sands industry and its utilization of coal-fired generation. The Alberta oil sands are the third largest oil deposit in the world and have experienced a rapid increase in production and consequently emissions. Furthermore, Alberta primarily utilizes coal for base load generation with coal traditionally making up approximately 50 percent of the electrical generation capacity and almost two-thirds of electricity output. The oil sands are economically viable at current oil prices, and Alberta has an abundance of coal reserves. This study projects emissions using CERI’s 2010 Supply Model Realistic Scenario1 and examines abatement opportunities within the oil sands and the role that Carbon Capture and Storage (CCS) can have in the advancement of “clean-coal” technologies.

Emission sources sensitivity study for ground-level ozone and PM2.5 due to oil sands development using air quality modeling system: Part I - model evaluation for current year base case simulation

Year of Publication: 2012

Abstract:
We conducted four source apportionment simulations using the Community Multiscale Air Quality (CMAQ) photochemical grid modelling system in order to investigate and assess the relative importance of specific emissions sources and/or geographic regions on ambient ozone and PM air quality in the Alberta Oil Sands Region (AOSR). Local point and area sources, medium range transport of mobile sources and biogenic emissions were examined.The elimination of emissions from local stationary point sources reduced 8-h ozone concentrations and greatly reduces the PM2.5 concentrations in AOSR; similar results are seen in the local area source zero-out simulations but with less ozone and PM2.5 reductions than seen in the local point source zero-out run. Although the mobile source medium-range transport reduced 8-h ozone concentrations in the urban plume from Edmonton that results in some ozone and PM2.5 concentration reductions in the southern part of the AOSR, it has little effect on the elevated ozone and PM2.5 concentrations in the oil sands development area of the AOSR where the highest ozone and PM2.5 concentrations are estimated. The elimination of all anthropogenic emissions in Alberta so that only biogenic emissions remained resulted in large reductions in 8-h ozone concentrations in the AOSR, with the highest remaining ozone in the 50–52 ppb range occurring south of Fort McMurray; very low PM2.5 concentrations are also estimated across Alberta, including the AOSR, when anthropogenic emissions are eliminated in Alberta. Emission sources sensitivity study for ground-level ozone and PM2.5 due to oil sands development using air quality modelling system: Part II – Source apportionment modelling (PDF Download Available).

Emissions of carbon dioxide from tar sands plants in Canada

Authors Furimsky, E.
Year of Publication: 2003

Abstract:
The CO2 emissions from the Canadian tar sands plants approach 0.09 and 0.16 tonne per barrel of synthetic crude produced in the plants employing fluid coking and delayed coking processes, respectively. The total CO2 emissions from the utilization of liquid fuels by combustion approach 0.4 tonne per barrel. When the CO2 emissions from the production of synthetic crude, refining, and utilization of fuels are combined, the emissions from utilization account for about 80 and about 70% of the emitted CO2 when fluid coking and delayed coking processes are considered, respectively. Then, there is the much greater potential for the reduction of CO2 emissions on the fuel utilization side than that on the synthetic crude production side. The amount of CO2 emitted from the expanded production of synthetic crude depends on the coking process chosen for expansion. A plant producing 500 000 bbl/d of synthetic crude using the fluid coking process may emit about 16 million tonnes of CO2 annually, whereas the same daily production in the plant employing a delayed coking process would emit 30 million tonnes of CO2 annually. The combined production of 1 million barrels a day of synthetic crude would emit 46 million tonnes of CO2 annually, which accounts for less than 8% of the Canadian CO2 emissions. At the same time, the combined production would contribute almost 50% to the liquid fuels pool in Canada. Definitely, the reduction of CO2 emissions can be achieved more readily by implementing proper actions and regulations on the liquid fuels utilization side than those on the production side.

End pit lakes guidance document 2012

Authors Hrynyshyn, J.
Year of Publication: 2012

Abstract:
End pit lakes (EPLs) have been proposed as permanent features of the final reclaimed landscape in the mineable oil sands region. No oil sands end pit lake currently exists, but about 30 are proposed. This document presents the scientific and engineering expertise to guide reclamation activities associated with EPL design and construction. It provides practical technical guidance and supporting tools to be used by industry, specifically an interdisciplinary team of operational managers, mine planners, and designers. It is also intended to be used as a primary reference by government regulators charged with overseeing the oil sands and designers of research and monitoring programs. It should be used in conjunction with other guidance documents involving oil sands reclamation. CEMA has produced similar guidance documents for wetlands, soils, revegetation, and riparian areas.

End pit lakes technical guidance document

Authors Westcott, F., & Watson L.
Year of Publication: 2007

Abstract:
This Technical Guidance Document is intended to provide preliminary design and management recommendations for End Pit Lakes (EPLs) in the Athabasca oil sands area. EPLs are an integral component in the management, operation and final reclamation landscape of oil sands development. This Technical Guidance Document will provide managers and oil sands industry representatives with guidelines to help resolve the optimal design and EPL parameters for their respective projects. This Technical Guidance Document is a living document and is meant to be flexible and responsive in its content. The first edition is based on knowledge gathered to date (2007) and will be updated as new information and research results become available. The second edition is expected in about 5 years, or in 2012, and should expand upon the current knowledge base, research results and recommendations for EPL design and management. An EPL will be established in a mined-out pit of an excavated area. It will consist of a bottom substrate capped with water; soft tailings or other process-related materials may be placed on top of the bottom substrate. An EPL will need to be controlled, managed and monitored throughout much of its initial filling and during discharge to downstream aquatic environments. Ultimately, the EPL will become a biologically active, self-sustaining and functional ecosystem. There are uncertainties regarding the construction, maintenance and final success of EPLs. The development of EPLs as a reclamation tool for process-affected waters raises issues of concerns for regional stakeholders. This document summarizes the perspectives and concerns of regulators, environmental and community groups, Aboriginals and the oil sands industry itself. Applicable government legislation, guidelines and policies are summarized. Historical data are insufficient to determine a realistic outcome of the final features of EPLs. Modelling and relevant background studies have been the basis of research, but a fully realized EPL has yet to be constructed. Issues to be considered during the development, implementation and management of EPLs include the design, amounts and inflow/outflow rates of reclamation and natural waters, water quality, stratification and the toxicity and/or concentrations of compounds. EPLs will need to meet water quality guidelines prior to release to adjacent environments. Issues also include potential impacts to aquatic life, the bioaccumulation of compounds within the food web and the development and sustainability of the ecosystem. Ongoing research, monitoring and new technologies will fill in these gaps. This document summarizes the results of historic research on EPLs. Current research directed by the CEMA EPLSG is also summarized. To date, the EPLSG research has focused on the selection and refinement of models best suited to predicting the potential for meromixis in EPLs. Nomographs have been developed that predict the stratification behaviour of lakes over time under various salinity, depth and size features. Future research will focus on further improvement of meromictic modelling, the influence of water quality on meromixis and biophysical modelling. Key physical, chemical and biological components to be considered during the design and management of EPLs are described. Recommended design specifications to attain the goal or desired outcome of these components are also compiled in table format. Monitoring requirements including key parameters and frequency are included. Adaptive management is recommended as a method of incorporating flexibility and responsiveness to ongoing management challenges. The process of designing, managing and operating an EPL is summarized, as is the process for obtaining a reclamation certificate.

Endocrine disruption and oxidative stress in larvae of Chironomus dilutus following short-term exposure to fresh or aged oil sands process-affected water

Year of Publication: 2013

Abstract:
Understanding the toxicity of oil sands process-affected water (OSPW) is a significant issue associated with the production of oil from the Alberta oil sands. OSPW is acutely and chronically toxic to organisms, including larvae of Chironomus dilutus. In this study, fresh OSPW (‘WIP-OSPW’) was collected from the West In-Pit settling pond and aged OSPW (‘FE5-OSPW’) was collected from the FE5 experimental reclamation pond, both of which are located on the Syncrude Canada Ltd. lease site near Fort McMurray, Alberta, Canada. Larvae of C. dilutus were exposed to a freshwater control, WIP-OSPW, or FE5-OSPW for 4 or 7 days and survival, growth, and markers of oxidative stress and endocrine disruption were assessed. Survival was not significantly different among treatment groups. Compared to masses of larvae exposed to freshwater, masses of larvae exposed to WIP-OSPW were 49% lesser on day 4 and 62% lesser on day 7. However, organisms exposed to FE5-OSPW did not have significantly lesser masses than controls. Abundances of transcripts of glutathione-s-transferase (gst), catalase (cat), and glutathione peroxidase (gpx), which are important for the response to oxidative stress, were significantly altered in larvae exposed to WIP-OSPW, but not FE5-OSPW, relative to controls. Peroxidation of lipids was greater in larvae exposed to WIP-OSPW, but not FE5-OSPW. Exposure to fresh OSPW might have caused endocrine disruption because abundances of transcripts of the steroid hormone receptors, ultraspiricle protein (usp), ecysteroid receptor (esr), and estrogen related receptor (err) were greater in larvae exposed to WIP-OSPW for 7 days, but not FE5-OSPW. These results suggest that lesser growth of larvae of C. dilutus exposed to fresh OSPW might be due to oxidative stress and disruption of endocrine processes, and that aging of OSPW attenuates these adverse effects.

Endophytic fungi associated with pioneer plants growing on the Athabasca oil sands

Authors Bao, X.
Year of Publication: 2009

Abstract:
Fungal endophytes live inside plants without causing apparent symptoms of infection. All plant species surveyed thus far, including liverworts, mosses, seedless vascular plants, conifers, and angiosperms, harbor one or more endophytic fungi. Fungal endophytes can be divided into four groups including class 1, class 2, class 3 and class 4 endophytic fungi according to host range, colonization pattern, transmission, and ecological function. Class 2 fungal endophytes benefit their host by increasing environmental stress tolerance (i.e. water, temperature, salt) in a habitat-specific manner. In my study, class 2 fungal endophytes were studied from weedy plants growing in an environmentally stressed area: mine tailings from the Athabasca oil sands. This area is a vast hydrocarbon reserve in western Canada that supplies 10% of Canadian oil needs. Hydrocarbons are extracted from tar sands with hot water, alkali, and solvents. The tailing sands can later be remediated (by adding organic material and fertilizer) to establish new plant communities. Prior to remediation, tailing sands have extremely low content of organic carbon and available minerals, and are hydrophobic compared to unimpacted and remediated soils. Nevertheless, Taraxacum (dandelion) and Sonchus (sow-thistle) can colonize extracted tailing sands even prior to remediation. Preliminary results show that pioneer plants have similar fungal abundance as plants of unextracted treatments. Fungal endophytes were isolated from surface sterilized Taraxacum and Sonchus that had been growing upon unimpacted, remediated and extracted soil. Fungi isolated in this way included Alternaria, Tricoderma, Fusarium and an unidentified Perithecial Ascomycote. These endophytic fungi were used to inoculate tomato plants in a greenhouse trial to determine whether they confer stress tolerance to host plants, especially for drought and low mineral nutrition. Before exposing the tomato plants to environmental stresses, the specific endophytic fungal strains applied were successfully recovered from tomato plants originally inoculated with the same endophytic fungi. Although the other endophytic fungi turned out to be harmful to the tomato plants in the test, a Trichoderma spp. strain isolated from samples of extracted treatment appears to confer tolerance of tailing sands to the tomato plants. This Trichoderma spp. strain which we can call TSTh20-1was molecularly identified as Trichoderma harzianum. Despite an identification to species, all strains of T. harzianum are not necessarily identical regarding strain-specific attributes. Using similar techniques described here, it is possible to isolate and potentially use beneficial class 2 endophytic fungal strains for the remediation process in the Athabasca oil sands or to assist plant growth in other high stress environments.

Enduring neoliberalism in Alberta's oil sands: The troubling effects of private-public partnerships for First Nation and Metis communities

Authors Taylor, A., & Friedel T.
Year of Publication: 2011

Abstract:
Changes in federal government relations with First Nations and Métis in Canada have been described as shifting over time, from fur trade colonialism, to welfare colonialism, to neoliberal partnerships. Acknowledging changes and continuities in Aboriginal peoples–state relations over time, this article examines the effects of recent policies that emphasize private–public partnerships for economic development on Indigenous communities in northern Alberta. We argue that while the term ‘partnership’ connotes equality, cooperation, and consensus, the actual workings of partnerships are anything but equal, and the effects include fragmentation, competition, and lack of overall accountability. These outcomes work against the needs and aspirations of Indigenous communities.

Enter keywords or search terms and press Search

Search this site


Subscribe to the site

Syndicate content

Bookmark and Share